LS3 Veraram Pics Please!
Thread Starter
Pro
Joined: Apr 2004
Posts: 559
Likes: 43
From: Bonita Springs FL
LS3 Veraram Pics Please!
I would appreciate if anyone has pics of their Veraram set up. I'm in the middle of my install and can't tell if I'm missing pieces or not. The instructions are pathetic to say the least. 
Thanks in advance!
Thanks in advance!
Thread Starter
Pro
Joined: Apr 2004
Posts: 559
Likes: 43
From: Bonita Springs FL
Thanks!
I can tell I'm missing a clamp. I see you didn't put the throttle body spacer on, any reason? Did you use the angle coupling or both straight?
This isn't rocket science but they could at least include a parts list with the instructions. Sheesh!
I can tell I'm missing a clamp. I see you didn't put the throttle body spacer on, any reason? Did you use the angle coupling or both straight?
This isn't rocket science but they could at least include a parts list with the instructions. Sheesh!
Former Vendor
Joined: Dec 2009
Posts: 3,353
Likes: 166
From: 19804
The TB spacer is not needed with the cartrige style MAF sensors and the Vararam maf housing. Both couplers i used were strait. You want the intake to be as low as possible to prevent it from hitting the hood liner.
