HUD question...
Thread Starter
Instructor
Joined: Dec 2010
Posts: 147
Likes: 0
From: roanoke tx
HUD question...
how hard would it be to install a HUD unit in my c6 ? i do all my own work on my car but when it comes to electrical stuff im not so confident ... has anyone done it before??
Retired & lovin' it!
Joined: Mar 2005
Posts: 4,475
Likes: 549
From: Jackson NJ
Your profile doesn't state where you're located, but Steve Doten, who lives in Connecticut has a reputation as an ace with Corvette electricals. If he's too far for you, he may be able to get you some general instructions so you can determine if it's a DIY job you want to tackle. He usually hangs out on the Northeast Forum site.....do a search & send him a PM. Matter-of-fact, someone posted a message looking for several guys to get together & have Steve do the HUD installs for them at one location.....check the Northeast messages.
Team Owner
Joined: Sep 2005
Posts: 20,352
Likes: 568
From: Ventura County, Calif
Many have done it themselves. There really isn't "much" electrical involved. Here's a thread with discussion, tips, pics and linked reference threads that should get you through it. 
http://forums.corvetteforum.com/c6-c...my-09-1lt.html
http://forums.corvetteforum.com/c6-c...my-09-1lt.html
Thread Starter
Instructor
Joined: Dec 2010
Posts: 147
Likes: 0
From: roanoke tx
Many have done it themselves. There really isn't "much" electrical involved. Here's a thread with discussion, tips, pics and linked reference threads that should get you through it.
http://forums.corvetteforum.com/c6-c...my-09-1lt.html
http://forums.corvetteforum.com/c6-c...my-09-1lt.html
awsome, thanks for the help
