But on a serious note, there should be tons of vendors who carry it. Good luck.
Hawk LS Series Harmonic Balancer Installation Tool
Thread Starter
Melting Slicks
Joined: Dec 2004
Posts: 3,120
Likes: 119
St. Jude Donor '10
Hawk LS Series Harmonic Balancer Installation Tool
Hawk LS Series Harmonic Balancer Installation Tool
Here is the Hawk LS Series Harmonic Balancer Installation Tool. It has been on market for over 10 years now and proven itself to be a must when installing a harmonic balancer. Universal installer tool kits do not work well with the GM LS Series motors. No longer do you have to chance stripped or damaged crank threads trying other installation methods.
There are two versions offered, the GM LS1, LS6, LS2 & LS3 or the GM LS7. The GM LS7 version is approximately 3 inches longer due to the deeper crank threads in the GM LS7. So the tool needs to be longer. The GM LS7 version can be used on other LS motors but there may be clearance issues with the added length of the tool during use.
HOW TO ORDER? PLACE YOUR ORDER HERE
HERE FOR GM LS1, LS6, LS2 & LS3
HERE FOR GM LS7
CURRENT DISCOUNT COUPON CODES
If you have any questions, please e-mail or call us as we do not frequent CORVETTE FORUM and may not answer any posts in a timely manner. Thank you.
THIS IS WHY YOU NEED OUR INSTALLER TOOL. THIS VIDEO SHOWS A MECHANIC NOT USING OUR TOOL.
Last edited by COSPEED; Dec 8, 2012 at 03:51 PM.
Pro
Joined: Mar 2011
Posts: 534
Likes: 33
From: Southern cali
Melting Slicks
Joined: Dec 2006
Posts: 2,694
Likes: 106
Please answer the first question this time. And the second is a valid one too:
1. Does it act as a puller too? You need a puller to pull the original HB out, correct? If not, do you sell that tool too?
2. Which tool does the LS3 dry-sump engine need? The LS3 or LS7? That motor has a forged crank, which is different than wet-sump LS3s. Thx.
1. Does it act as a puller too? You need a puller to pull the original HB out, correct? If not, do you sell that tool too?
2. Which tool does the LS3 dry-sump engine need? The LS3 or LS7? That motor has a forged crank, which is different than wet-sump LS3s. Thx.
Thread Starter
Melting Slicks
Joined: Dec 2004
Posts: 3,120
Likes: 119
St. Jude Donor '10
Hawk LS Series Harmonic Balancer Installation Tool
Here is the Hawk LS Series Harmonic Balancer Installation Tool. It has been on market for over 10 years now and proven itself to be a must when installing a harmonic balancer. Universal installer tool kits do not work well with the GM LS Series motors. No longer do you have to chance stripped or damaged crank threads trying other installation methods.
There are two versions offered, the GM LS1, LS6, LS2 & LS3 or the GM LS7. The GM LS7 version is approximately 3 inches longer due to the deeper crank threads in the GM LS7. So the tool needs to be longer. The GM LS7 version can be used on other LS motors but there may be clearance issues with the added length of the tool during use.
HOW TO ORDER? PLACE YOUR ORDER HERE
HERE FOR GM LS1, LS6, LS2 & LS3
HERE FOR GM LS7
CURRENT DISCOUNT COUPON CODES
If you have any questions, please e-mail or call us as we do not frequent CORVETTE FORUM and may not answer any posts in a timely manner. Thank you.
THIS IS WHY YOU NEED OUR INSTALLER TOOL. THIS VIDEO SHOWS A MECHANIC NOT USING OUR TOOL.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
