Posted in C6 general...
Thread Starter
Heel & Toe
Joined: Feb 2011
Posts: 18
Likes: 0
From: Tri-Cities WA
Posted in C6 general...
Lookin' for how to decode a Vette VIN that I may have posted in the wrong forum: http://forums.corvetteforum.com/c6-c...her-a-vin.html
Race Director
Joined: Jan 2005
Posts: 10,924
Likes: 854
From: Daytona Beach FL
The VIN doesn't telll you much about the car, i.e. you won't find the trim level, etc. in the VIN. You can look at the RPO code sticker in your glove compartment to find everything that was built into the car as it came down the assembly line.
BTW, all Vettes are built at the Bowling Green plant!
However, when you look at that original thread you started in the General Section, you'll find info about the VIN, and that http://www.compnine.com site will give you everything you ever wanted to know about your car.
Bob
BTW, all Vettes are built at the Bowling Green plant!
However, when you look at that original thread you started in the General Section, you'll find info about the VIN, and that http://www.compnine.com site will give you everything you ever wanted to know about your car.
Bob
Last edited by BEZ06; Feb 15, 2011 at 01:27 PM.
Thread Starter
Heel & Toe
Joined: Feb 2011
Posts: 18
Likes: 0
From: Tri-Cities WA
VIN decoding
Thanks BEZ06. I followed the VIN link you mentioned - good source. I don't own the car in question. I was contacted by a seller who provided Chevy file photos (eVOX) of two different C6s with different paint, lots of std. and optional equipment listed for the car identified as a 2009 C6. The "listed" MSRP was $74k+, offered at $49,999 with zero miles. I wanted enough info to judge whether the deal was too good to be true especially with a $24k price reduction! 
