When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What is the best place to penetrate the firewall to run wires to a pod mounted on the A Pillar. Need to run wide-ban O2 and boost wires. While you are at it does the A pillar just pull off?
What is the best place to penetrate the firewall to run wires to a pod mounted on the A Pillar. Need to run wide-ban O2 and boost wires. While you are at it does the A pillar just pull off?
Thanks
Rod
I used an existing grommet in the firewall and ran the wires behind the panel on the left side drivers side floor then threaded them up with a coat hanger to the A-Pillar. Came out great.