programming homelink
#1
Safety Car
Thread Starter
programming homelink
could someone do a step by step guide on programming homelink. some of us dont have owners manules and dont wanna buy them just for this. im surprised this is not a sticky already. please someone do a nice write up on this and hopefully it will become a sticky. thanks
#2
Safety Car
Why not start at the HomeLink site...
http://www.homelink.com/program.php
If your car was produced after Oct 2006 you don't have a "HomeLink" visor you have a Lear Car2U visor. In that case try here:
http://www.learcar2u.com/m/pdf/car2u...ence_guide.pdf
http://www.homelink.com/program.php
If your car was produced after Oct 2006 you don't have a "HomeLink" visor you have a Lear Car2U visor. In that case try here:
http://www.learcar2u.com/m/pdf/car2u...ence_guide.pdf
#3
Burning Brakes
You can download the owners manual from gmpartshouse The link is http://gmpartshouse.com/. Go to downloads. It says Corvette and Nav system but you will get the owners manual.
#4
Drifting
You can go to HomeLink's web site: www.homelink.com/ and download the programming instructions specifically for your car's visor unit by make, model & year. You then may need the programming instructions for your particular brand of garage door lift to finish setting up the HomeLink, particularly if you have a lift that employs a "rolling code" which is changed each time the opener is operated.
#5
Melting Slicks
i turned the ignition on, pressed the learn button on my garage door and then pressed the homelink button on the visor, worked for me the first time out.