Steering Wheel
Thread Starter
Burning Brakes
Joined: Oct 2004
Posts: 914
Likes: 0
From: Dallas Georgia
Steering Wheel
Would like to have my outside corners, some vettes have controls, mine is bare, would like to have mine painted gloss black to match my center console radio stack..How do you remove these two pieces of trim?
Safety Car
Joined: Nov 2006
Posts: 4,023
Likes: 266
From: San Jose California
You have to pop the air bag off then you can get at the screws that hold them on. It's easy but you need to do it correctly in order to be safe.
The info you need is contained in this tutorial:
http://forums.corvetteforum.com/c6-z...placement.html
Z//
The info you need is contained in this tutorial:
http://forums.corvetteforum.com/c6-z...placement.html
Z//
Thread Starter
Burning Brakes
Joined: Oct 2004
Posts: 914
Likes: 0
From: Dallas Georgia
Air Bag
Was affraid that bag would have to come out...at least not all the way...I can see the torque head screws holding the spokes in from your photo..think I will get the new spokes in hand before I tackle this project, that way the new ones can go right back in all at one time..
thanks,
randy
thanks,
randy
You have to pop the air bag off then you can get at the screws that hold them on. It's easy but you need to do it correctly in order to be safe.
The info you need is contained in this tutorial:
http://forums.corvetteforum.com/c6-z...placement.html
Z//
The info you need is contained in this tutorial:
http://forums.corvetteforum.com/c6-z...placement.html
Z//
