





***********Halltech Super Bee MF103 Package w/ installation!!!!!!!!!!




SOUND BITE-UNTUNED
deserted road used for special sound bite.
We have worked with a reputable shop in Brookfield, Wisconsin (Reina International) that has done our exhaust systems, intakes for customers, and even our Pfadt carbon fiber driveshaft, which I could not believe the quality of their work. We have been doing business with Reina International for 7 years, and Jim Booth of Corvette Accessories unlimited has been for 12 years.
They mounted our Ultraleggera wheels, tires which they get discounted, our headers on three different cars, and I would recommend them to anyone. No, I do not get a kickback.
Ok, the deal would consist of the following:
Halltech Super Bee MF103

Corsa cat back exhaust (you pick the tips and sound level-I loved the Extremes) http://www.corsaperf.com/product_loc...ake=7&model=64

Halltech emailTune®X3 powertuning. As you know the Super Bee MF103 and the Corsas do NOT REQUIRE ANY TUNING. more information

Then why tune? The combo above without tuning is still subject to the fat air fuel ratios from the factory.
We would tune your car for E10 fuel (better throttle response and less idle quality issues from the superlean 15:1 air/fuel ratio using E10 in an E0 ECM (NFF)
Perfect cleaner, meaner and greener air fuel ratio for more performance and torque.
Rev limit change if requested
Top speed limit eliminate
Tire size changes
Better timing for the track or street
We do not mess with the automatic tranny, sorry
Fan on lower coolant temp
Other secret Halltech tuning changes with 8 years and 500 tunes under my belt.
Other options can be done, but time limiting might require a longer appointment or dropping off the car.
The exhaust and intake and tuning should be an afternoon delight.
Pricing soon.
I have a poll on this. If there is interest, I will make it happen.
Jim Hall
"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
423-915-6056
For service email:
orders@halltechsystems.com
www.halltechsystems.com
Last edited by Halltech; Jun 26, 2011 at 12:34 PM.






