DIC control panel connector missing
Thread Starter
Cruising
Joined: Jan 2007
Posts: 14
Likes: 0
From: Hill Country TEXAS
DIC control panel connector missing
Here is a weird one...
Doing a HUD install on my 2011, got everything together, and started to reconnect the panel and all the switches... and I seem to have completely lost the blue connector that goes to the dic controls.
Anybody with lots of behind the panel experience have an idea where this connectors wire issue from so I can try to track it down?
Appreciate any help possible before my last 350 brain cells are destroyed.
Doing a HUD install on my 2011, got everything together, and started to reconnect the panel and all the switches... and I seem to have completely lost the blue connector that goes to the dic controls.
Anybody with lots of behind the panel experience have an idea where this connectors wire issue from so I can try to track it down?
Appreciate any help possible before my last 350 brain cells are destroyed.
Thread Starter
Cruising
Joined: Jan 2007
Posts: 14
Likes: 0
From: Hill Country TEXAS
DOH!
I see what my problem was... apparently melting the duct in half during the hud install released a large amount of ID10T into the car, and I inhaled it.
(Yes, that connector does come out of the IP, that was not installed yet.
I see what my problem was... apparently melting the duct in half during the hud install released a large amount of ID10T into the car, and I inhaled it.
(Yes, that connector does come out of the IP, that was not installed yet.
Former Vendor
Joined: Jan 2009
Posts: 12,288
Likes: 23
From: League City Texas
Houston Events Coordinator
St. Jude Donor '11-'12, '14
I believe in the Beer Fairy
blue connector to HUD comes from aftermarket harness that has to be tapped into the factory harness. If you have any problems or questions feel free to give me a hollar.
Andrew
832457 9253
Andrew
832457 9253
