Radiator fan programming
Thread Starter
Advanced
Joined: Jan 2007
Posts: 94
Likes: 0
Radiator fan programming
I had my radiator fan wired to a relay bypassing the default harness so it would always run. Recently replaced the fan and got a new fan control module. Now the car will heat up if idling too long. Highest I let it go was 210 and it was climbing. It used to sit at about 165-185 when it was always in. It's like the fan isn't spinning high speed. It is spinning though verified by sticking a straw in. My Car was tuned a few years ago and they changed the fan program but since I got a new fan control module would that programming go back to stock? Its also about 35 degrees outside too. Another thing is that I don't have my A/C belt put on right now, not sure if this would matter or not? I let it sit idling for about 10 minutes after driving it and the temperature seemed to stay at 210 degrees. Any help would be appreciated
Last edited by vaelon2007; Dec 9, 2011 at 10:45 AM.
Supporting Vendor
Joined: Sep 2007
Posts: 11,216
Likes: 178
From: Pensacola Florida GO GATORS!!! www.rlsebring.com www.c6c7vette.com
St. Jude Donor '17
Fan in stock programming will run a steady 210 to 220 and is normal. I have mine programmed to run @ 90% when it hits 220. Starts at about 60% around 190.
