Engine Rebuild Update
Thread Starter
Drifting
Joined: Jul 2010
Posts: 1,833
Likes: 256
From: Shawnee, OK
Engine Rebuild Update
Well, the boys at LG have NZYCAR torn apart pretty good. Diagnosis: weak and broken valve springs, chewed up cam lobes, completely spent lifter.
Good news is to go with the new X3 cam, lifters, springs, and oil pump, are new ported and polished LS3 heads with a nice 5-angle valve job and a complementary port job on the intake. A set of B&B Bullets are also going on for good measure - figured the Noize should go to a new level.
Should be all done in the next two weeks. Can't wait for the dyno numbers !
Good news is to go with the new X3 cam, lifters, springs, and oil pump, are new ported and polished LS3 heads with a nice 5-angle valve job and a complementary port job on the intake. A set of B&B Bullets are also going on for good measure - figured the Noize should go to a new level.
Should be all done in the next two weeks. Can't wait for the dyno numbers !
