New heads advice,input or recommendations
Thread Starter
Advanced
Joined: Jul 2012
Posts: 59
Likes: 0
From: Louisville Kentucky
New heads advice,input or recommendations
I bought a set of heads for a LS2/LS3 conversion part number 88958758 - Chevrolet Performance LS3 CNC Ported Cylinder Heads(will need to mill .025-.030 to get compression back as they are 68cc head).Right now I have Varaam,SlP headers,SLP Powerflow catback,160 thermostat,SLP programmer on a SLP 465 tune.
With the new parts to install:I have LS3 injectors, L76 intake, LS3 head gaskets,LS3 Yella Terra 1.8 rockers.I am intending to do this on stock cam as the heads flow 360cfm@600intake and 254cfm@600 exhaust.
This on a 2007 convertible Z51 m6 LS2 this car is 100% a street car and I don't want to sacrifice low end power more than I have and I will do a supercharger later with low boost(5lbs).I am wondering about push rod size and anything I might be missing.
With the new parts to install:I have LS3 injectors, L76 intake, LS3 head gaskets,LS3 Yella Terra 1.8 rockers.I am intending to do this on stock cam as the heads flow 360cfm@600intake and 254cfm@600 exhaust.
This on a 2007 convertible Z51 m6 LS2 this car is 100% a street car and I don't want to sacrifice low end power more than I have and I will do a supercharger later with low boost(5lbs).I am wondering about push rod size and anything I might be missing.
