Who makes this splitter?
Thread Starter
Race Director
Joined: Apr 2010
Posts: 16,253
Likes: 1,657
From: Arizona
Who makes this splitter?
Haven't had any luck locating the manufacturer of this splitter. It is not an APR, C7 Carbon, LG Motorsports, MTI, RPI, or any other that I could find.....Notice it is flush mount and a bit wider than normal.
Anyone have any leads? Pratt & Miller? Corvette Race Bodies?
Anyone have any leads? Pratt & Miller? Corvette Race Bodies?
Thread Starter
Race Director
Joined: Apr 2010
Posts: 16,253
Likes: 1,657
From: Arizona
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Safety Car
Joined: Jan 2004
Posts: 4,974
Likes: 14
From: Pinellas Park Fl
St. Jude Donor '08-'09 & '12, '14
It's not rocket science.......
If you went to their website you should have seen the contact info page and you would have noticed that he goofed on the ph # it is 847-634-7534 or 1-855-4-BLACKDOG
And there is a picture
http://www.blackdogspeedshop.com/ind...gory&Itemid=65
"We also have two versions of the ZR1 chin spoiler available for C6 ZR1's and Z06's. The first is basically a factory replacement, while the second is a more race inspired piece. It is slightly longer, and deletes the factory brake duct inlets, as they interfere with the aerodynamics.
Either can be used with our without the factory ZR1 reinforcement bracket, which we can provide (it is recommended for track use)"
If you went to their website you should have seen the contact info page and you would have noticed that he goofed on the ph # it is 847-634-7534 or 1-855-4-BLACKDOG
And there is a picture
http://www.blackdogspeedshop.com/ind...gory&Itemid=65
"We also have two versions of the ZR1 chin spoiler available for C6 ZR1's and Z06's. The first is basically a factory replacement, while the second is a more race inspired piece. It is slightly longer, and deletes the factory brake duct inlets, as they interfere with the aerodynamics.
Either can be used with our without the factory ZR1 reinforcement bracket, which we can provide (it is recommended for track use)"
Thread Starter
Race Director
Joined: Apr 2010
Posts: 16,253
Likes: 1,657
From: Arizona
It's not rocket science.......
If you went to their website you should have seen the contact info page and you would have noticed that he goofed on the ph # it is 847-634-7534 or 1-855-4-BLACKDOG
And there is a picture
http://www.blackdogspeedshop.com/ind...gory&Itemid=65
"We also have two versions of the ZR1 chin spoiler available for C6 ZR1's and Z06's. The first is basically a factory replacement, while the second is a more race inspired piece. It is slightly longer, and deletes the factory brake duct inlets, as they interfere with the aerodynamics.
Either can be used with our without the factory ZR1 reinforcement bracket, which we can provide (it is recommended for track use)"
If you went to their website you should have seen the contact info page and you would have noticed that he goofed on the ph # it is 847-634-7534 or 1-855-4-BLACKDOG
And there is a picture
http://www.blackdogspeedshop.com/ind...gory&Itemid=65
"We also have two versions of the ZR1 chin spoiler available for C6 ZR1's and Z06's. The first is basically a factory replacement, while the second is a more race inspired piece. It is slightly longer, and deletes the factory brake duct inlets, as they interfere with the aerodynamics.
Either can be used with our without the factory ZR1 reinforcement bracket, which we can provide (it is recommended for track use)"
However, when I went to their website to look for said item when posted number was incorrect, I completely missed this link:
(Click to learn more about Blackdog's carbon fiber body panels)
So, when I missed this link, I did not come to their splitter. Make sense? Since I could not locate the splitter on their website due to missing the link, I called them utilizing the number on their website, left a message with a call back number, and I never got a call in return.
Last edited by WICKEDFRC; Dec 29, 2012 at 10:54 AM.
Drifting
Joined: May 2006
Posts: 1,655
Likes: 293
From: Canton Georgia
Looks like the older version of this one:
http://www.acproducts.us/whatsnew.htm
MTI racing may have the older version:
http://www.mtiracing.com/Purchase/20...or-C6-Z06.html
http://www.acproducts.us/whatsnew.htm
MTI racing may have the older version:
http://www.mtiracing.com/Purchase/20...or-C6-Z06.html
Thread Starter
Race Director
Joined: Apr 2010
Posts: 16,253
Likes: 1,657
From: Arizona
WSTAAB,
Thanks for the links. Although the top photo looks very similiar, it also looks a tad short in width (the protruding cord from the nose of the car forward).
Thanks for the links and I will attempt to contact Kerry Hitt (again.)
Thanks for the links. Although the top photo looks very similiar, it also looks a tad short in width (the protruding cord from the nose of the car forward).
Thanks for the links and I will attempt to contact Kerry Hitt (again.)
