Cam install done
Apr 3, 2013 | 06:12 AM
Thread Starter
Instructor
Joined: Sep 2011
Posts: 231
Likes: 0
From: Chester County PA
Cam install done
After 2 months ...Finally done.....It is alive!
The 411:
2008 LS3 w/auto trans
SW longtubes w/ highflow cats
NGK plugs
MSD plug wires
stock air intake w/ aftermarket filter
NPP exhaust w/ mild 2 wild controller
Cam: Lunati
223/231
113 LSA
.615 lift @ IN , .598 @ EX
The numbers
453HP
425TQ
The video
http://www.youtube.com/watch?v=busYd...ature=youtu.be
Last edited by qwik150; Apr 3, 2013 at 06:17 AM .
Apr 3, 2013 | 07:12 AM
Melting Slicks
Joined: Sep 2007
Posts: 2,136
Likes: 139
From: Port St Lucie Florida
Apr 3, 2013 | 10:57 AM
Joined: Jan 2013
Posts: 407
Likes: 11
From: Mooresville North Carolina
Apr 3, 2013 | 03:01 PM
Le Mans Master
Joined: Dec 2005
Posts: 6,999
Likes: 1,684
From: Southeast TX
Stellar results! Bet you didn't leave much on the table vs a much bigger grind. Drivablility good? Still on the stock converter?
Apr 3, 2013 | 07:36 PM
Thread Starter
Instructor
Joined: Sep 2011
Posts: 231
Likes: 0
From: Chester County PA
Quote:
Originally Posted by
old motorhead
Stellar results! Bet you didn't leave much on the table vs a much bigger grind. Drivablility good? Still on the stock converter?
Still on stock converter. Just a little bucking.Just need to get familiar with it. The cam sounds good and comes alive in mid range.
Apr 4, 2013 | 12:09 AM
Burning Brakes
Joined: Aug 2010
Posts: 1,222
Likes: 52
From: Honolulu Hawaii
Apr 7, 2013 | 01:06 AM
Intermediate
Joined: Nov 2012
Posts: 37
Likes: 0
From: Huffman Texas
At what rpm does bucking occur?
Apr 7, 2013 | 01:07 AM
Intermediate
Joined: Nov 2012
Posts: 37
Likes: 0
From: Huffman Texas
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
Apr 7, 2013 | 06:36 PM
Thread Starter
Instructor
Joined: Sep 2011
Posts: 231
Likes: 0
From: Chester County PA
Yes dual springs installed.The bucking is at low RPM. Acceptable
Apr 7, 2013 | 06:55 PM
Intermediate
Joined: Nov 2012
Posts: 37
Likes: 0
From: Huffman Texas
Quote:
Originally Posted by
qwik150
Yes dual springs installed.The bucking is at low RPM. Acceptable
Contemplating similar set up, is it a custom grind? Where can I get it, change anything other than csm and sorings?
Apr 7, 2013 | 06:55 PM
Intermediate
Joined: Nov 2012
Posts: 37
Likes: 0
From: Huffman Texas
Apr 7, 2013 | 06:57 PM
Race Director
Joined: Aug 2005
Posts: 13,592
Likes: 187
From: Hudson WI
NCM Sinkhole Donor
Apr 8, 2013 | 04:41 AM
Thread Starter
Instructor
Joined: Sep 2011
Posts: 231
Likes: 0
From: Chester County PA
Quote:
Originally Posted by
willjeffw
Cam and springs?
Springs,rods,double roller timing chain, heavy duty oil pump.