Problem programming fobs on an 06 c6
Thread Starter
Advanced
Joined: Mar 2008
Posts: 59
Likes: 1
Problem programming fobs on an 06 c6
Tried reprogramming my fobs erasing and reprogramming but now neither work. I can't even get my window up or start from glovebox. Before I reprogrammed both fobs would start car from glovebox. Help
Team Owner
Joined: May 2004
Posts: 82,175
Likes: 1,319
From: McKinney TX
St. Jude Donor '21-'22-'23-'24
If both fobs would start the car from the glove box, then they didn't need reprogramming. Probably just needed new fob batteries or remove an interfering electronic device.
Did the reprogramming seem to work from beginning to end? If not, post all the steps that worked and maybe they can still be reprogrammed.
I've enhanced your thread title to attempt to get someone who knows about programming fobs to respond.
Did the reprogramming seem to work from beginning to end? If not, post all the steps that worked and maybe they can still be reprogrammed.
I've enhanced your thread title to attempt to get someone who knows about programming fobs to respond.
Last edited by Vette_DD; Apr 27, 2013 at 12:21 PM.
Thread Starter
Advanced
Joined: Mar 2008
Posts: 59
Likes: 1
Thank you. I had a dead car battery and replaced it. Then the fobs both quit later the next day. Odd but go replaced both batteries in them. Both could start car in glovebox. But still not recognized. Reprogrammed ok or so it seemed this am the long way and now nothing. I finally giggled one around for 5 min in glovebox and started so I got the window up.
Moderator emeritus
Joined: Jun 2001
Posts: 18,599
Likes: 3,955
From: Jacksonville Florida BWO Dayton, Cincinnati, Bloomsbury NJ, Cincinnati
2015 C7 of the Year Finalist
OK, here's 2 things.
Thing 1) What to do if you get FOB not detected.
Thing 2) Programming procedure
Thing 1 ---> >> FOB not detected checklist <<
Thing 2 ---> >>C6 Fob Programming and Glove Box Slot Testing Procedures<<
Elmer
Thing 1) What to do if you get FOB not detected.
Thing 2) Programming procedure
Thing 1 ---> >> FOB not detected checklist <<
Thing 2 ---> >>C6 Fob Programming and Glove Box Slot Testing Procedures<<
Elmer
