***LMR LS7 CNC program picks up 35rwhp!!!***
Thread Starter
Supporting Vendor
Joined: Nov 2010
Posts: 3,893
Likes: 652
From: Houston, TX
***LMR LS7 CNC program picks up 35rwhp!!!***
Grey brought us his car to do some testing on our brand new prototype LS7 cnc program. Made 2 pulls, pulled heads off, installed our ported heads. Made 2 more pulls after a finished tune. Car ended up making 581rwhp through the stock intake manifold and throttle body!! That is within 5rwhp of a well known aftermarket casting ls7 headed/Fast102/102 ls7 we did a while back! Call us today to get your heads CNC'd today!
713-466-9900
Going Together
713-466-9900
Going Together
Last edited by Late Model Racecraft; Jun 3, 2013 at 12:04 PM.
Thread Starter
Supporting Vendor
Joined: Nov 2010
Posts: 3,893
Likes: 652
From: Houston, TX
Yes we had previously installed a camshaft and bolt ons and tuned the car.
Anytime you increase airflow through the motor you pick up power (Given fuel is there with it) And its hard to give up low end power in a car with a stock camshaft.
Anytime you increase airflow through the motor you pick up power (Given fuel is there with it) And its hard to give up low end power in a car with a stock camshaft.
