What are your estimates?
Thread Starter
Instructor
Joined: Sep 2012
Posts: 115
Likes: 0
From: Los Angeles California
What are your estimates?
So a friend of mine built an incredibly nasty C****o and I was wanting to see what you guys think he could get out of this build:
RHS LSx Race Block - Tall Deck Block 502
Callies Billet Ultra CCW LS1 4.600 Crankshaft
Callies Compstar 6.460 LS1 Rods W/ ARP 2000 rod bolts
Wiseco Custom Pistons
WCCH-All Pro LS7 Heads Ti Intake and Ti Exhaust
Jesel C5R Pro-Series Adjustable Shaft Rockers For Solid Rollers
ARE Dry Sump System - LS1 Dry Sump System for 502 with larger pressure stage
Morel LS1 Hydraulic Roller Lifters - Link Bars
Custom HKE Cam - 263 / 274 / 113+3
HKE Mega .700 lift Hydraulic Roller Spring kit with ID
locators and Ti retainers and new Valve Stem Seals
He's going for the highest numbers possible N/A. I couldn't get any more cam specs, but I would guess its got a lot of lift. So what do you think it could make?
RHS LSx Race Block - Tall Deck Block 502
Callies Billet Ultra CCW LS1 4.600 Crankshaft
Callies Compstar 6.460 LS1 Rods W/ ARP 2000 rod bolts
Wiseco Custom Pistons
WCCH-All Pro LS7 Heads Ti Intake and Ti Exhaust
Jesel C5R Pro-Series Adjustable Shaft Rockers For Solid Rollers
ARE Dry Sump System - LS1 Dry Sump System for 502 with larger pressure stage
Morel LS1 Hydraulic Roller Lifters - Link Bars
Custom HKE Cam - 263 / 274 / 113+3
HKE Mega .700 lift Hydraulic Roller Spring kit with ID
locators and Ti retainers and new Valve Stem Seals
He's going for the highest numbers possible N/A. I couldn't get any more cam specs, but I would guess its got a lot of lift. So what do you think it could make?
Last edited by Slammin07; Aug 28, 2013 at 12:34 PM.
