My 07
Thread Starter
Intermediate
Joined: Nov 2012
Posts: 43
Likes: 1
From: Jacksonville Florida
My 07
My first Vette...BB PRT..Airaid Intake..Tuned..Lowered...If I go with a cam, which one should I install?
Last edited by MikeJr72; Oct 18, 2013 at 09:53 PM. Reason: left out a question for the group
Drifting
Joined: Jul 2009
Posts: 1,319
Likes: 64
From: Lakeville, MA
St. Jude Donor '10
With my '06 I went with a 228/232 114+2 comp cams ground on XER lobes per Spinmonsters recommendation. Great cam. I would also recommend that you add 1 3/4" full length headers and a FAST intake to get the most out of your setup.
Tolero Apto Victum
Joined: Jul 2007
Posts: 9,669
Likes: 37
From: Woodlands TX
The FAST 102 intake is a great mod for the LS2, I gained over 20 HP/TQ through the whole power band. OP: How is your damper, does it wobble a lot, if so then do the cam and install an ATI Damper http://store.katechengines.com/dampers-c41.aspx plus maybe one of these http://store.katechengines.com/bille...sioner-p2.aspx Good luck with your mods!
