Dash cluster calibration after faceplate installation
Thread Starter
Burning Brakes
Joined: Jan 2005
Posts: 790
Likes: 9
From: Charleston SC
Dash cluster calibration after faceplate installation
I was considering getting some different face color guages for my cluster. After seeing where it is extremely difficult to ensure all the needles are accurately reinstalled, I am a little worried about doing this task myself and want to send it off to make sure it is calibrated properly after the installation.
Who does that?
Who does that?
Team Owner
Joined: Sep 2005
Posts: 20,352
Likes: 568
From: Ventura County, Calif
The gauge faces are made by US Speedo and they do offer install service but they aren't a vendor so you will need to look them up. Here's a post from a couple years ago:
http://forums.corvetteforum.com/c6-c...os-inside.html
And here's a vendor who offers the service using US Speedo faces but their pics have disappeared:
http://forums.corvetteforum.com/c6-c...uges-sale.html
http://forums.corvetteforum.com/c6-c...os-inside.html
And here's a vendor who offers the service using US Speedo faces but their pics have disappeared:
http://forums.corvetteforum.com/c6-c...uges-sale.html
