IAT breakout help
Thread Starter
Burning Brakes
Joined: Feb 2013
Posts: 1,021
Likes: 52
From: Coral Springs, FL
IAT breakout help
I bought an LS7 air intake to replace my LS2 with. I will be getting tuned for the LS7 MAF, but I want to add an IAT sensor. I Have an LS7/3 to LS2 harness converter - so my question is: what color wires do I use for the IAT?
Here are some pics:
Here are some pics:
Race Director
Joined: Aug 2005
Posts: 13,592
Likes: 187
From: Hudson WI
NCM Sinkhole Donor
Mine just plugged in.
http://www.lingenfelter.com/mm5/merc...5#.Usx70bSu-nU
Hope you are close to the shop doing the tune, because the car will really run bad.
http://www.lingenfelter.com/mm5/merc...5#.Usx70bSu-nU
Hope you are close to the shop doing the tune, because the car will really run bad.
Last edited by timd38; Jan 7, 2014 at 05:13 PM.
Thread Starter
Burning Brakes
Joined: Feb 2013
Posts: 1,021
Likes: 52
From: Coral Springs, FL
That is a MAP sensor harness... I was talking about MAF. My tuner, Jeremy Formato will be tuning at a do-it-yourself shop here in Miami later this month. I'll do the install myself, then push my car over to the rollers!
Race Director
Joined: Aug 2005
Posts: 13,592
Likes: 187
From: Hudson WI
NCM Sinkhole Donor
http://www.ebay.com/itm/like/290780191347?lpid=82
Thread Starter
Burning Brakes
Joined: Feb 2013
Posts: 1,021
Likes: 52
From: Coral Springs, FL
