Post your LS3 stroker builds please
Thread Starter
Pro
Joined: Oct 2009
Posts: 685
Likes: 61
From: Louisiana
Post your LS3 stroker builds please
Hey guys I'm doing a little premature planning for a 418ci LS3 build. Just want to see some setups you guys have. Would really rather see 416 and 418 but any LS3 based stroker is fine. Just list your setup(heads, cam, intake,exhaust,etc) and what it made on the dyno. I'm not sure what I want to do for heads. So far my choices are either PRC small bore LS7 or TEA ported LS3 heads.
Goal is 550 rwhp. Thanks in advance guys.
Goal is 550 rwhp. Thanks in advance guys.
Drifting
Joined: Sep 2007
Posts: 1,649
Likes: 50
From: Goldsboro NC
TSP 418
Weisco -4cc pistons
4.080 bore
Callies 6.125 rods
Callies 4.000 crank
Cometic 0.051 gaskets
11:5.1 CR
EPS Custom 240/248 .624 .603??116lsa (dont rememer the entire specs. will look once home)
LS7 Lifters
42lb injectors
SDCP blue printed oil pump
FAST 92 (not ported)
LS2 90mm TB (not ported)
TEA 243's Stage 2s (ported obviously)
1 3/4 LG Street headers
Halltech Venom Intake
SLP UD Pulley
Corsa Xtreme's
VERY intrested to see what she will lay down. Im hoping for at least 500rw
Weisco -4cc pistons
4.080 bore
Callies 6.125 rods
Callies 4.000 crank
Cometic 0.051 gaskets
11:5.1 CR
EPS Custom 240/248 .624 .603??116lsa (dont rememer the entire specs. will look once home)
LS7 Lifters
42lb injectors
SDCP blue printed oil pump
FAST 92 (not ported)
LS2 90mm TB (not ported)
TEA 243's Stage 2s (ported obviously)
1 3/4 LG Street headers
Halltech Venom Intake
SLP UD Pulley
Corsa Xtreme's
VERY intrested to see what she will lay down. Im hoping for at least 500rw
