2005 C6 - HVAC
Thread Starter
Advanced
Joined: Sep 2013
Posts: 68
Likes: 0
2005 C6 - HVAC
I'm unable to explain why shortly after my 2005 C6 - HVAC is started and the temperature set, my system starts shutting down. Meaning - I set the temperature and adjusts the air flow inside the vehicle cab. In approximately 5 to 10 minutes the compressor turns off and the air flow decreases due to the fan speed being reduced in segmented steps and the cab of the car is filled with musty warm air. In a few minutes everything returns to normal and the hole cycle starts again. Has anybody experienced this and if so what was the resolution.
Any help with this would be greatly appreciated..
Sincerely
Bill
Any help with this would be greatly appreciated..
Sincerely
Bill
