Need electrical help with fuses

Reply Subscribe

Thread Tools

Search this Thread

Nov 20, 2014 | 12:50 PM

Lew Shaw

Thread Starter

Instructor

Joined: Oct 2014

Posts: 195

Likes: 11

From: Glendale Arizona

Need electrical help with fuses

On my 2010 C6 I have the Wild 2 Mild Exhaust Controller for my RPP exhaust. This unit uses a piggyback fuse adapter that replaces the 10A "Seat Heater" fuse. This works just fine. Now, I am trying to add the Curb Alert system to my Vette and it too requires the "Seat Heater" fuse location. Obviously, they can't both go there, so I need to know if there is another fuse location that I can use for the Curb Alert.

Any help or advice is greatly appreciated!

Lew

Nov 20, 2014 | 01:31 PM

2k Cobra

Melting Slicks

Joined: Aug 2000

Posts: 2,327

Likes: 44

From: Sacramento CA

I can't help you other than suggest you call the supplier of the Curb Alert and get their advice..

Good luck, 2k

Nov 20, 2014 | 02:36 PM

Nate@VanBortelChevy

Platinum Supporting Dealership

Joined: Jul 2014

Posts: 722

Likes: 336

From: Rochester New York

Quote:

Originally Posted by Lew Shaw

You can use a minifuse "piggyback" or "add a circuit". It's basically a pigtail connector that plugs into a mini fuse spot and has a space a fuse to protect the circuit that it is plugged into and a second fuse spot for the circuit you're adding.

Nov 20, 2014 | 06:42 PM

Lew Shaw

Thread Starter

Instructor

Joined: Oct 2014

Posts: 195

Likes: 11

From: Glendale Arizona

Thanks everyone, I found a workable fuse location and all is functioning properly.

Lew

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump