Plaincoupe

Has anyone used this camshaft? Ive searched an didnt come up with anything much. So i'm making an post to see if theres some info out there...... Im ready to do a cam swap to drop ETs more. Stock cam has pulled me (well my wife) to an best of 11.25@119 best mph has been 122. Mods are Fast 102 intake, vararam cold air intake, long tubes, 3600 yank which has gotten an best of 1.54 60ft, wheels n tires drag radails. I tune with the HPtuners, dyno'ed 357hp with 407tq.. had some help from Subfloor also.....i wanted the polluter cam but martin from tick says the torquemax will work alot better for my combo. soooo id like to hear more about this cam. this is an forum so im asking questions.

Car is an ls2 A6....

C U IN REARVEIW

I would take martin's advise as he is very knowledgeable on this subject and produces some killer builds.

Plaincoupe

I Agree! He's a smart fellow. Just want to hear more positive results from anyone useing this cam.

Plaincoupe

Well cam kit is installed....wasn't as bad as i've heard it was..Didn't have any problems with the balancer, or balancer bolt, or the power streering pump bolts dunno... I got it running with an ok idle an drive tune....going to get it dyno'd before I get on it tho.... with the lil tuning ive done it drives good, no surging like I've been hearing about. but I do have an stall converter so that helps. Stall converter does seen a lot tigher now feels more like an 2800 vs 3600. but idle is now 950rpm vs 650rpm so that takes away for the stall slip....I see an 4000 stall in the future Cant wait to get it professionaly tuned!

Plaincoupe

The new cam works great made 77hp more! went from 357hp to 434hp to the wheels. ran at the track yesterday new best 10.72@125! 6.86@100 in the 1/8 1.50 60ft.......cam works....there it is! i'm happy.. with more track time an tuning i can see 10.6s with an better 60ft.
Thats with wifey driving also!

xBoostx

That is a great return for a cam change and your 60 foot time is great, what tires and size you are using?

Good combo you wrench wife drive I need to let mine wife do some passes I guess...

Vids don't work.

Plaincoupe

Yeah wifey is alot smaller than me. ...17 inch wheels with 275/40/17 MTs drag radials..

Vito.A

Wow, that's great. 77hp and a 10 second pass with a cam change! You could do commercials for all the camshaft manufacturers.


Did the track chase you off for no rollbar?

Plaincoupe

Thanks! No track didn't say anything, but they do want ya to wear an helmet.

wiz_of_wuz

Nice pass!!! Love the consistency of the auto and the driver!