Gear reduction starters
Thread Starter
Safety Car
Joined: Apr 2012
Posts: 4,077
Likes: 239
From: Houston TX
Gear reduction starters
Anybody here have some experience/recommendations on what to use? Mine is starting to drag a bit, tested battery and it's fine, starter was pulling close to 300 amps, time to go. I see this one but it's kind of expensive.
http://shop.advanceautoparts.com/p/m...ntent=10211809
http://shop.advanceautoparts.com/p/m...ntent=10211809
Team Owner
Joined: Sep 2005
Posts: 20,352
Likes: 568
From: Ventura County, Calif
No personal experience, just offering some info for you to look at: 
https://www.corvetteforum.com/forums...very-cool.html
http://www.corvetteforum.com/forums/...er-again.html#
https://www.corvetteforum.com/forums...very-cool.html
http://www.corvetteforum.com/forums/...er-again.html#
Thread Starter
Safety Car
Joined: Apr 2012
Posts: 4,077
Likes: 239
From: Houston TX
No personal experience, just offering some info for you to look at:
https://www.corvetteforum.com/forums...very-cool.html
http://www.corvetteforum.com/forums/...er-again.html#
https://www.corvetteforum.com/forums...very-cool.html
http://www.corvetteforum.com/forums/...er-again.html#
there a re several different one's out there but I don't know how good they're going to fit, if they'll work with headers or any of the stuff that Sac City already had figured out. That's why I asked here.
