Help!!!
Thread Starter
6th Gear
Joined: Jun 2014
Posts: 6
Likes: 0
Help!!!
I've gone threw 2 drive shafts and world of headache second one didn't last 1000 miles before it twisted and shattered in 2 places. I have a 05 auto that I broke the diff housing in so I replaced it witha new rpm and at the same time did my cam as well and new converter. After doing this I've had the worst vibrating ever in my drivetrain and can't figure it out for nothing and replaced quiet a bit trying to. I had the converter checked again wasn't out of balance by much 7 grams I've bought a upgraded driveshaft that eliminate the couplers and had the tranny built. So before I put everything back in I'm still concerned that it is something and I'm going to end up back in square one. Anyone have any idea or could help me I don't know if I could be installing it back wrong done a couple others with no problems but is there anything or any reason I might be missing please help me before I tell my insurance the car came up missing. Just joking i love my world of headache but any thing or idea would be GREATLY appreciated thank you.
Team Owner
Joined: Jun 2005
Posts: 46,295
Likes: 2,596
From: Northern, VA
St. Jude Donor '15
"In honor of jpee"
https://www.corvetteforum.com/forums...-discussion-9/
Options: get a Factory Service Manual for your year and see procedure. Find a shop near you that knows how to do it and pay for it. Go to above regional section since you don't have where you live in your profile and ask question for someone who's done it to give you a hand.
Options: get a Factory Service Manual for your year and see procedure. Find a shop near you that knows how to do it and pay for it. Go to above regional section since you don't have where you live in your profile and ask question for someone who's done it to give you a hand.
