LS2 Callaway Honker Install HELP
Thread Starter
Advanced
Joined: Mar 2014
Posts: 54
Likes: 0
From: Old Saybrook Communisticut
LS2 Callaway Honker Install HELP
So I purchased a Honker off of this site used, already installed on a Radiator shroud, I figure easy install right. Well I get all the bolts/Push pins out and I can not get the lower portion or wings of the radiator shroud to move in enough to clear the two metal bracket that are over the top of the shroud. Brackets are not removeable. Any who has installed this CAI please help me out
Drifting
Joined: Feb 2010
Posts: 1,527
Likes: 34
Here using forum search:
https://www.corvetteforum.com/forums...adiator+shroud
Cut off a little of the flat lower left corner of shroud will help reinstall. Once installed, cut off portion will not be visible.
In fact, there were a few postings on the subject. If you want to read more, do a search or just do what I did, cut off the bottom corner.
https://www.corvetteforum.com/forums...adiator+shroud
Cut off a little of the flat lower left corner of shroud will help reinstall. Once installed, cut off portion will not be visible.
In fact, there were a few postings on the subject. If you want to read more, do a search or just do what I did, cut off the bottom corner.
