Mamo MSD results!
Racer
Joined: Dec 2015
Posts: 488
Likes: 59
From: New Melle, Missouri
2018 C6 of Year Finalist
Drifting
Joined: Apr 2012
Posts: 1,613
Likes: 111
From: Birmingham Alabama
So one dyno read 560 and another read 623 on the same setup? I had Chad port my FAST and picked up 2-3mph in the 1/8th mile. I'm a fan of the manifolds and a good port job. Congrats on the new found power and times!
Pro
Joined: Dec 2011
Posts: 592
Likes: 67
From: Slippery Rock PA
Hi Guys just wanted to share my results with you. I bought a MSD from Tony Mamo and spent the extra coin to have him port it, the results were amazing!
A little about the before and after:
Before I bought the car this way so please bare with me.... 1 7/8 ARH LT, 3" off road x pipe w/ corsa extreme out back, and a RPM B3 cam with supporting valve springs and exhaust valves replaced. NO porting and NO milling what so ever all running threw a RPS twin disc. with this set up the car put down a what I think is weak but none the less 515 rwhp and only trapped 129 in the quarter.
After all above mods only thing add was the Mamo ported MSD and a TPIS 102mm TB with a re tune on the dyno car made an awesome 562 rwhp with the graph smoothed at 15. But more of a real world gain cause I do not much care for dyno Queens (too many variables) the car picked up 4 mph and I trapped 133 4 back to back passes at cecil county dragway.
Now with the DA getting better as winter is coming the car has made a best of 135.81 mph the thing really picked up seat of your pants power for sure....
http://youtu.be/gyb6HbgmXDU
A little about the before and after:
Before I bought the car this way so please bare with me.... 1 7/8 ARH LT, 3" off road x pipe w/ corsa extreme out back, and a RPM B3 cam with supporting valve springs and exhaust valves replaced. NO porting and NO milling what so ever all running threw a RPS twin disc. with this set up the car put down a what I think is weak but none the less 515 rwhp and only trapped 129 in the quarter.
After all above mods only thing add was the Mamo ported MSD and a TPIS 102mm TB with a re tune on the dyno car made an awesome 562 rwhp with the graph smoothed at 15. But more of a real world gain cause I do not much care for dyno Queens (too many variables) the car picked up 4 mph and I trapped 133 4 back to back passes at cecil county dragway.
Now with the DA getting better as winter is coming the car has made a best of 135.81 mph the thing really picked up seat of your pants power for sure....
http://youtu.be/gyb6HbgmXDU
Pro
Joined: Dec 2011
Posts: 592
Likes: 67
From: Slippery Rock PA
Did you see a big difference with the AI heads? I am in the process of a very similar build as yours. Mamo MSD, AI 280cc heads, custom BTR cam, Halltech 108r. RPM transmission stage IV and 3.73 rear gears and RTS weld wheels with big n skinnies. I cant wait to see what Mamo's intake looks like.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski