Ebay GPI aluminum 64mm radiator
#1
Ebay GPI aluminum 64mm radiator
Who has one? Already purchased one because I got a screaming deal. Trying to figure out my fan setup now. Also wondering about modifications to the mounting bracketry as this car has a forced induction future.
#4
It's installed in my GS right now with dual spal's and a custom shroud hooked to the factory control. Haven't been tuned yet and car runs 200-210 here in the Utah mountains. Hopefully getting tuned Tuesday to turn the fan on much lower. Ideally I would like to run 185-195 but that may be too much?
#5
It's installed in my GS right now with dual spal's and a custom shroud hooked to the factory control. Haven't been tuned yet and car runs 200-210 here in the Utah mountains. Hopefully getting tuned Tuesday to turn the fan on much lower. Ideally I would like to run 185-195 but that may be too much?
So short version, the PWM and it connector up on the side of the raditor is the weak links, but such will work fine when the PWM is just the controller for fan relays isntead (relays pulling power from the battery directly to power the fans).
Last edited by Dano523; 07-02-2016 at 05:45 PM.
The following users liked this post:
MUKAK (08-23-2016)