Need help on C5 Corvette Alternator Relocation
Thread Starter
Intermediate
Joined: Jan 2016
Posts: 35
Likes: 2
Need help on C5 Corvette Alternator Relocation
Plain and simple like the title says.
2000 Corvette FRC
434LSX
Twin 7675CEA Precisions
Issue that we are running into is that our turbo manifolds run down and forward to the turbos, then the exhaust runs up and back, over the manifolds. I have to figure out a way to relocate the alternator our of the way of the monifolds and exhaust path. I have seen many companies that make kits for LSx applications but nothing for the Corvette platforms. Really wanting to see if there is something out there as a bolt on solution before we just try and fab something up for it.
I searched a few times on here and only saw the old Halltech and PTK brackets, both of which have been long gone for a while now.
Thanks for any help!
***EDIT***
I just realized i posted this in C6 on accident. Mods please move
2000 Corvette FRC
434LSX
Twin 7675CEA Precisions
Issue that we are running into is that our turbo manifolds run down and forward to the turbos, then the exhaust runs up and back, over the manifolds. I have to figure out a way to relocate the alternator our of the way of the monifolds and exhaust path. I have seen many companies that make kits for LSx applications but nothing for the Corvette platforms. Really wanting to see if there is something out there as a bolt on solution before we just try and fab something up for it.
I searched a few times on here and only saw the old Halltech and PTK brackets, both of which have been long gone for a while now.
Thanks for any help!
***EDIT***
I just realized i posted this in C6 on accident. Mods please move
Last edited by HoustonLSX; Jan 18, 2016 at 05:49 PM.
