Tr6060 rebuild help/info
Thread Starter
Drifting
Joined: Sep 2014
Posts: 1,774
Likes: 38
Tr6060 rebuild help/info
So I took my tr6060 apart today because the main shaft broke an 4th gear syno went .so I found this out with the 4th gear .I'm thinking about having it sent out to get hardened so it doesn't do this again. 
3rd isn't as bad. So I'm looking for help an info on what people have done to there 60s to make stronger .
3rd isn't as bad. So I'm looking for help an info on what people have done to there 60s to make stronger .
Racer
Joined: Oct 2011
Posts: 475
Likes: 3
From: Jacksonville TX
I would contact RPM Transmission. They are a forum sponsor. I only have great customer service with them and very knowledgeable. They race there product.
This is nice write on rebuild if you haven't seen it. https://www.corvetteforum.com/forums...d-rebuild.html
This is nice write on rebuild if you haven't seen it. https://www.corvetteforum.com/forums...d-rebuild.html
Last edited by needcheese; Mar 28, 2016 at 09:11 PM. Reason: added url
