p0101 and more
Thread Starter
Intermediate
Joined: May 2016
Posts: 37
Likes: 2
p0101 and more
Hi. Today I got the errorcode P0101, went and bought some MAF cleaner and are now waiting for it to fully dry. Ive had the P0174 and p0171 before but they have cleared after a few drive-cycles.
However, when Im connecting my OBDII the DIC shows "service active handling" and "Service traction control", is this normal? Ive never seen them before while driving and not reading from the OBD.
Edit;
Installed the MAF again, cleared the codes and got some info:
MAF air flow: 8-220g/s(idle to 6k rpm)
MAP: 100kPa during WOT, 13-20 during deacceleration
Short term %: -14 to +20%, Average: 1% both banks during random driving(WOT, deacceleration, coast etc)
Long term %: 8-16% ( 10 at coasting and 16 was max during a WOT)
However, when Im connecting my OBDII the DIC shows "service active handling" and "Service traction control", is this normal? Ive never seen them before while driving and not reading from the OBD.
Edit;
Installed the MAF again, cleared the codes and got some info:
MAF air flow: 8-220g/s(idle to 6k rpm)
MAP: 100kPa during WOT, 13-20 during deacceleration
Short term %: -14 to +20%, Average: 1% both banks during random driving(WOT, deacceleration, coast etc)
Long term %: 8-16% ( 10 at coasting and 16 was max during a WOT)
Last edited by viktors94; Sep 16, 2016 at 09:49 AM.
