Ccp jam cam specs??
Thread Starter
Instructor
Joined: Dec 2011
Posts: 226
Likes: 17
From: Cumming Ga.
Ccp jam cam specs??
Hi there, I am trying to find the specs on CCP'S Jam Cam. It was referred to me for my blower set up on an M6 GS A&A set up. I like the aggressive idle but just wondering how it will do for daily driving. Has anyone ran this can with a blower, exhaust? Any other blower cams with an aggressive idle ud suggest with good driveability? Any input would be appreciated. Thanks!
Burning Brakes
Joined: Aug 2010
Posts: 1,222
Likes: 52
From: Honolulu Hawaii
look up Arun@CCP.Im running thier stage2 blower cam on a A6.226/238 605/615lift@115lsa.getting ready to order blower from A&A.
Thread Starter
Instructor
Joined: Dec 2011
Posts: 226
Likes: 17
From: Cumming Ga.
look up Arun@CCP.Im running thier stage2 blower cam on a A6.226/238 605/615lift@115lsa.getting ready to order blower from A&A.
Last edited by WESTFREESTYLE; Sep 29, 2016 at 02:17 AM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Instructor
Joined: Dec 2011
Posts: 226
Likes: 17
From: Cumming Ga.
I know what u mean. It def saves money & time that way. That's for sure. My kit has the V3 Si head. It was already done by previous owner. Really wish it was the Ti trim. Bump it up to 800w & leave it alone. I'm going to do the cam, fuel, meth n max out this blower n see where I'm at & go from there. Leaving intake, heads, bottom end alone tho.
Burning Brakes
Joined: Aug 2010
Posts: 1,222
Likes: 52
From: Honolulu Hawaii
Ive done my research and homework looking at all different angles with this setup.car main purpose is rollracing thats it.we do dig races down here outlaw style since we dont have a track.use my 4th gen.camaros for that.I envy you guys up there with legal tracks to run on.