Cam and rod...
12-17-2016, 07:34 PM
#1
Advanced
Thread Starter
Cam and rod...
I just bought a btr stage3, and 7.4 rods, will the stock length rods be a problem? Or should I have got 7.3 rods? I don't want problems down the road... car is a 05, ls2.. mods are dyno tuned, cai, no cats, lg long tubes, corsa over axle...
12-17-2016, 10:30 PM
#2
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
You need to measure for proper length.
12-17-2016, 10:51 PM
#4
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
It doesn't matter what someone else is doing. Spend the $20 for the tool to measure and find the right length for your car
12-17-2016, 10:58 PM
#6
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
https://www.summitracing.com/parts/c...sdhxoCya3w_wcB
https://www.briantooleyracing.com/pu...800-7-800.html
https://www.briantooleyracing.com/pu...800-7-800.html
Last edited by schpenxel; 12-17-2016 at 10:59 PM.
12-18-2016, 04:18 PM
#8
Team Owner
The answer to "what size pushrod" is always "measure".