Need cam advice
Thread Starter
5th Gear
Joined: Jan 2017
Posts: 5
Likes: 0
From: Abilene Texas
Need cam advice
My 2005 currently has the MS4 installed. I hate the low rpm surge and bucking, but I like the lope. What would be a better cam for drivability with a little lope?
Thanks for any input.
Current mods:
PRC 227cc 6 bolt heads
MS4 cam
Monster clutch level 3
Fast 102 intake
LS6 ported oil pump
In Motion double roller timing set
Powerbond 25% UD pulley
Mods already purchased to be installed:
JOC stage 1 sway bars and shocks
B&M ripper short throw shiftier
502hp/450tq
Thanks for any input.
Current mods:
PRC 227cc 6 bolt heads
MS4 cam
Monster clutch level 3
Fast 102 intake
LS6 ported oil pump
In Motion double roller timing set
Powerbond 25% UD pulley
Mods already purchased to be installed:
JOC stage 1 sway bars and shocks
B&M ripper short throw shiftier
502hp/450tq
Racer
Joined: Jan 2015
Posts: 375
Likes: 31
From: San Antonio TX
Seriously though, I would call someone like Cam Motion regarding your goals.....but off the cuff, their Stage-3 cam will lope, provide very good power and will be a LOT more driveable than the MS4.
http://store.cammotion.com/60-ls2-34...-compression-3
Best of luck!
KW
Thread Starter
5th Gear
Joined: Jan 2017
Posts: 5
Likes: 0
From: Abilene Texas
Thank you for the information. The low end surge and bucking drives me crazy. What I read about the MS4 is its a max effort cam, which is definitely not my intention on a regular basis. This car is for fun with the wife and the occasional weekend street race.
Last edited by kbrown9; Jan 15, 2017 at 11:57 PM.
