Input please 224/228 cam
Thread Starter
Advanced
Joined: Nov 2007
Posts: 65
Likes: 3
From: Baton Rouge LA
Input please 224/228 cam
Anyone have a 224/228 cam in LS3? If so any numbers (supporting mods), drivability? I am looking at a crane cam that is 224/228 114lsa that will work with my high lift rockers (1.85). I have heads that are milled 0.015" and a thinner head gasket so my ptv is cut 0.025". Looking for any experience with a 224/228 cam in ls3. Looking to get a cam without excessive lift or aggressive ramps so I can reuse my 1.85 roller rockers. The crane came is recommended with 1.8 rockers and I would end up with right at 0.600" lift. Please give input on this cam. Looking for low/mid range power, good drivability, slight lope.
Race Director
Joined: Oct 2005
Posts: 14,999
Likes: 200
From: Bay Area Ca.
Read through this for some more in sight:
http://www.superchevy.com/how-to/eng...ft-comparison/
http://www.superchevy.com/how-to/eng...ick-boomerang/
http://www.enginelabs.com/engine-tec...e-engine-dyno/
http://www.smokinvette.com/corvettef...ls3-vette.html
http://www.superchevy.com/how-to/eng...ft-comparison/
http://www.superchevy.com/how-to/eng...ick-boomerang/
http://www.enginelabs.com/engine-tec...e-engine-dyno/
http://www.smokinvette.com/corvettef...ls3-vette.html
Last edited by Boomer111; Feb 8, 2017 at 05:44 PM.
