Info help needed
Thread Starter
Instructor
Joined: Nov 2011
Posts: 135
Likes: 0
From: toronto ontario
Info help needed
I have a ls3 with a LPE GT12 cam installed. See photo of spec sheet, rockers 1.7, lifters a upgraded hydrolic roller. I am installing trick flow Genx 255 heads and not sure what length pushrods I should order. I'm guessing 7.700 or 7.750 ?
Your help will be much appreciated.
Thanks !
Your help will be much appreciated.
Thanks !
Safety Car
Joined: Feb 2007
Posts: 4,684
Likes: 107
From: Opelika Alabama
I think you should be asking trick flow, they should know what length to use with their heads, they should tell you what gasket{thickness} you should use, doesn't matter what cam you have.
Le Mans Master
Joined: Apr 2011
Posts: 7,821
Likes: 412
From: Montreal
St. Jude Donor '13
Originally Posted by CMY SIX
I think you should be asking trick flow, they should know what length to use with their heads, they should tell you what gasket{thickness} you should use, doesn't matter what cam you have.
So much wrong with this.
Safety Car
Joined: Jul 2009
Posts: 3,755
Likes: 190
From: Baton Rouge LA
St. Jude Donor '14, '16
Get a checker and order pushrods after unless you just get all the sizes that are "close" and return the ones you don't use.
