About Texas Speed Bald Eagle Cam. Anyon know anything?
06-22-2017, 07:12 PM
#1
Burning Brakes
Thread Starter
About Texas Speed Bald Eagle Cam. Anyon know anything?
Anyone know anything about this? How much HP and Torque it makes? An what LSA is it??? I've seen it on Leroy on Cleetus Mcfarland channel. Just wondering
http://www.texas-speed.com/p-6155-cl...lications.aspx
http://www.texas-speed.com/p-6155-cl...lications.aspx
06-23-2017, 10:03 AM
#5
Burning Brakes
Thread Starter
Curiosity setting in ain't it. I'm in the market for a cam similar to this with the intake and exhaust duration. So I want to know more. Lol
06-23-2017, 10:14 AM
#6
Intermediate
I here you. I have not seen this one yet and I was even looking on there page a few days ago. I was also in the market for a cam so I was searching pretty hard. I ended up buying the spinmonster cam for mine.
06-23-2017, 10:20 AM
#7
Burning Brakes
Thread Starter
I didn't see it on their page as I was going to the LS3 manual tranny. Then I went to the naturally aspirated page it there it was all shine. I was like hey that's the guy name on YouTube and the car name then I had to go back and see how it sounded but they did the heads, cam and Lsa supercharger all at once so I want to know something. Maybe it's just me.
06-23-2017, 10:55 AM
#8
Intermediate
Ok just got off the phone with them. They are not releasing lsa or lift. He said it will behave a lot like there stage 3 cam. He also said hp wise also right around what there stage 3 does. He says it will be .620+ on lift. Thats all I got out of him
06-23-2017, 03:51 PM
#9
Burning Brakes
Thread Starter
I e-mailed not much more info than you but *Wink Wink*: We don't offer any different LSA options on these cams. The Bald Eagle cams are mainly made as promotional cams for the Cleetus McFarland Facebbook and YouTube page. They're all custom cams based off our already existing shelf cams. They've only been out for a week or so. The LS3 Bald Eagle cam (229/242 .6XX"/.6XX" 112 LSA) is based off our stage 2 LS3 cam (229/244 .629"/.615" 112 LSA) which picked up roughly 70+ HP at the flywheel over stock.
They had a cam I was eye balling also it was a 229/236 which they don't make anymore. They can custom cut it though. It was the old Stage 2 cam, 229/244 is the new stage 2 so, I kind of wonder the what's the difference in the lift on the old cam verse the new cam. So that may put the bald eagle right at the same lift if the other 2 are the same. Hmmmmmm
They had a cam I was eye balling also it was a 229/236 which they don't make anymore. They can custom cut it though. It was the old Stage 2 cam, 229/244 is the new stage 2 so, I kind of wonder the what's the difference in the lift on the old cam verse the new cam. So that may put the bald eagle right at the same lift if the other 2 are the same. Hmmmmmm
09-03-2017, 08:45 AM
#11
Burning Brakes
Thread Starter
08-27-2018, 10:57 AM
#13
Team Owner
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
Why pick a cam due to a youtube clip or some dumb ad of cleetus? Call Isky or a well known cam co. and go straight to the source. Chances are its made by one of them anyways...lots of "Custom" cams are really off the shelf deals.
08-27-2018, 11:07 AM
#14
Burning Brakes
Thread Starter
I've already got a cam. Well working on my second one right now. Lol I original started the topic because it was close to their Stage 2 N/A cam. This post was over a year ago. Lol
Last edited by jaybee924; 08-27-2018 at 11:08 AM.