LS2 bore
Thread Starter
4th Gear
Joined: Jul 2017
Posts: 4
Likes: 0
for motor pull pistons and machine work what is a good estimate of how much i might be out of for parts and labor. i know every area is different but if you know somebody or u had it done yourself how much was it for everything?
Melting Slicks
Joined: Jun 2006
Posts: 2,497
Likes: 261
From: Miami Florida
Out of state purchase they never took any responsibility so it was time for me to roll up my sleeves, which I did (nobody better not touch my car) now nobody knows my car like me.
Tools are more affortable than trusting an a/h and depending on him.
I strongly recomend buying your car service manual and a book or two on how to hot rod the ls engine, these way you'll have all the know how and all questions answered you'll be glad you did all the best, Dave.
Last edited by xBoostx; Jul 13, 2017 at 07:38 PM.
Burning Brakes
Joined: Mar 2007
Posts: 1,107
Likes: 9
From: Wichita Falls, TX
Tools are more affordable than trusting an a/h and depending on him.
I strongly recommend buying your car service manual and a book or two on how to hot rod the ls engine, these way you'll have all the know how and all questions answered you'll be glad you did all the best, Dave.
I strongly recommend buying your car service manual and a book or two on how to hot rod the ls engine, these way you'll have all the know how and all questions answered you'll be glad you did all the best, Dave.
