Really Need Some Help Here!!
Thread Starter
Racer
Joined: Apr 2017
Posts: 434
Likes: 35
Really Need Some Help Here!!
When installing new shifter box bushings... I over tightened the shifter rod shoulder clamp...
It then cracked the clamp in one side at the top...
I believe it's going out and really need to know if someone has fixed this...
welding etc..
Without removing the tq tube and that whole process.. I can't be the first one here...
THX
It then cracked the clamp in one side at the top...
I believe it's going out and really need to know if someone has fixed this...
welding etc..
Without removing the tq tube and that whole process.. I can't be the first one here...
THX
