Need a good/accurate source for torque specs...
Thread Starter
Le Mans Master
Joined: Jan 2009
Posts: 5,656
Likes: 112
From: ocean springs mississippi
Need a good/accurate source for torque specs...
I have the entire driveline removed (doing clutch,diff,eng/trans mounts,fuel system,ect),looking for a good reference to source MANY torque specs ?
Team Owner
Joined: Sep 2005
Posts: 20,352
Likes: 568
From: Ventura County, Calif
Posts 2 and 4 in here have links. I don't know if they are still active, talon90's should be there.
https://www.corvetteforum.com/forums...-need-pdf.html
https://www.corvetteforum.com/forums...-need-pdf.html
Safety Car
Joined: May 2011
Posts: 3,807
Likes: 508
From: Oshawa, Ontario
you really should own the factory service manuals if you work on your own car.makes things so much simpler.there are procedures in those manuals for lots of different things that you will have a hard time finding on the interwebs.have seen lots posted over the years here that were absolutely incorrect
Thread Starter
Le Mans Master
Joined: Jan 2009
Posts: 5,656
Likes: 112
From: ocean springs mississippi
you really should own the factory service manuals if you work on your own car.makes things so much simpler.there are procedures in those manuals for lots of different things that you will have a hard time finding on the interwebs.have seen lots posted over the years here that were absolutely incorrect
Thread Starter
Le Mans Master
Joined: Jan 2009
Posts: 5,656
Likes: 112
From: ocean springs mississippi
Last edited by C U IN REARVEIW; Dec 24, 2017 at 11:02 AM.
