Stock Z06 ride height?
Thread Starter
Cruising
Joined: Apr 2018
Posts: 10
Likes: 1
From: New Berlin WI
Stock Z06 ride height?
Hi all,
So I recently got a C6Z, what can I say its awesome and looks sharp. The only downfall I currently have is that the previous owner lowered the car all the way down in the front, so now driving on even somewhat level roads is a challenge and I cringe whenever I hear a scrape. It is mostly just the air dam underneath the car that scrapes but still I would like to resolve this. I've searched around on here and youtube as to what the stock specs are but cannot find any definitive answers. I've found all kinds of videos and posts about lowering the car but nothing about brining it back up. So if anyone could point me in the right direction, or otherwise measure a stock car from the ground to the lip of the fender and I could work based on that it would be appreciated. Thanks!!!
So I recently got a C6Z, what can I say its awesome and looks sharp. The only downfall I currently have is that the previous owner lowered the car all the way down in the front, so now driving on even somewhat level roads is a challenge and I cringe whenever I hear a scrape. It is mostly just the air dam underneath the car that scrapes but still I would like to resolve this. I've searched around on here and youtube as to what the stock specs are but cannot find any definitive answers. I've found all kinds of videos and posts about lowering the car but nothing about brining it back up. So if anyone could point me in the right direction, or otherwise measure a stock car from the ground to the lip of the fender and I could work based on that it would be appreciated. Thanks!!!
Team Owner
Joined: Sep 2005
Posts: 20,352
Likes: 568
From: Ventura County, Calif
Here's an old similar discussion should get you started.
https://www.corvetteforum.com/forums...-question.html
https://www.corvetteforum.com/forums...-question.html
