Please help!!!!! 2006 base model body control module question
Thread Starter
Pro
Joined: Dec 2013
Posts: 709
Likes: 12
From: Grand Falls Newfoundland
Please help!!!!! 2006 base model body control module question
Hey guys we are doing an auto swap on a 2006 base model.... we got most of the wiring done now and we are stock on getting power fir the pcs tcm which clearly states power must be taken from C2-B4..... however the only bcm module I can find online is from a 2007 base with a manual trans and under c2 there is no b4...... just numbers 1 through to 72..... does anyone ya e the diagram for a 2006 bcm or know if they are the same for a 2007? It’s apparently very important to take the power from c2-b4 if not you will get ses codes displayed..... thanks
Le Mans Master
Joined: Dec 2004
Posts: 5,493
Likes: 809
From: West coast CA
Hey guys we are doing an auto swap on a 2006 base model.... we got most of the wiring done now and we are stock on getting power fir the pcs tcm which clearly states power must be taken from C2-B4..... however the only bcm module I can find online is from a 2007 base with a manual trans and under c2 there is no b4...... just numbers 1 through to 72..... does anyone ya e the diagram for a 2006 bcm or know if they are the same for a 2007? It’s apparently very important to take the power from c2-b4 if not you will get ses codes displayed..... thanks
I think you're looking for the Underhood C2, pin B4, "Ignition 1 Voltage." C2 is the big grey connector under the fuse block.
