2008 A6 Transmisson
#1
2008 A6 Transmisson
I think its going to be time to get my transmission built this winter, who is doing built A6 transmissions for cars with power upgrades. Car currently makes 600 and 632 on 150 nx shot. Street and drag race use. I don't believe that RPM works on these. Looking for good builders to talk to about doing this.
Any suggestions and experience would be appreciated.
Any suggestions and experience would be appreciated.
#2
Race Director
Member Since: Sep 2007
Location: Peoria/Phoenix AZ
Posts: 16,555
Received 2,060 Likes
on
1,505 Posts
C6 of Year Finalist (performance mods) 2019
Century Transmission in TX has been on the leading edge of performance built A6's. Extensively and severely drag tested by Christopher aka the Subfloor on this forum.
The following users liked this post:
damascus1986 (09-24-2018)
#3
Supporting Vendor
I think its going to be time to get my transmission built this winter, who is doing built A6 transmissions for cars with power upgrades. Car currently makes 600 and 632 on 150 nx shot. Street and drag race use. I don't believe that RPM works on these. Looking for good builders to talk to about doing this.
Any suggestions and experience would be appreciated.
Any suggestions and experience would be appreciated.
The following 2 users liked this post by subfloor@centurytrans:
damascus1986 (09-24-2018),
Fernando@LGMotorsports (09-26-2018)
#4
#5
Supporting Vendor
#8
I have a 2014 stingray z51 pushing right now 900whp and my 6 speed auto transmission is slipping 2-3 gear and 4-5 gear and that’s even with billet clutches and billet pin shaft. Been searching to see what to do to fix it. Called RPM and they don’t really mess around with the 6 speed auto. And yes when the car was making 650+ to 720 never had an issue till pass 750whp. Any suggestions guys?