Dreaded valve seals leaking
Thread Starter
Navigator
Joined: May 2016
Posts: 9
Likes: 0
Dreaded valve seals leaking
So im pretty sure every one who has went with a cam and aftermarket valve springs has experienced the seals leaking, coming off, getting torn up and end up in the engine oil pan.
I have been down this road a few times and I think I have found the solution.
Since we couldn't use the oem design (where the spring holds the seat down against the head) due to them being too wide. It looks like texasspeed has come up with the design like this that fits with aftermarket duel springs
Link here-----> https://www.texas-speed.com/p-6283-p...e-springs.aspx
I haven't ordered them yet, and was hoping some one could chime in with either experience with this new product, or some insight for the "slip over" seals.
Thanks in advance!
I have been down this road a few times and I think I have found the solution.
Since we couldn't use the oem design (where the spring holds the seat down against the head) due to them being too wide. It looks like texasspeed has come up with the design like this that fits with aftermarket duel springs
Link here-----> https://www.texas-speed.com/p-6283-p...e-springs.aspx
I haven't ordered them yet, and was hoping some one could chime in with either experience with this new product, or some insight for the "slip over" seals.
Thanks in advance!
Thread Starter
Navigator
Joined: May 2016
Posts: 9
Likes: 0
haha yea it was a bit steep, but if it solves that problem that literally everyone has ran into I wouldn't mind paying it. PS they charge $21 dollars minimum to ship these lol!
But hey, im getting really sick of taking the valve covers off and doing this over and over, I have done it at least 3 times now.
But hey, im getting really sick of taking the valve covers off and doing this over and over, I have done it at least 3 times now.
