C6 intake reducer coupler
#1
C6 intake reducer coupler
Corvette High Flow Reducer Coupler : 2006-2013 C6 LS3 stock throttle body to stock air cleaner. These 4 ply vinyl seem overpriced ($44.00 ++). Any suggestions?
#2
Team Owner
You can get silicone couplers for as cheap as $10. You just need to know what size ID to get.
The following users liked this post:
Tahoe (06-03-2019)
#3
Corvette High Flow Reducer Coupler : 2006-2013 C6 LS3 stock throttle body to stock air cleaner.
sz: 4.5" length 4.75 wide I.D. to 4.0" wide I.D.
Please let me know where $10 coupler is.
thank you
sz: 4.5" length 4.75 wide I.D. to 4.0" wide I.D.
Please let me know where $10 coupler is.
thank you
#6
knew about Spectre....I was replying to MTPZ06's response...."You can get silicone couplers for as cheap as $10. You just need to know what size ID to get."
thanks
thanks
Last edited by Tahoe; 06-04-2019 at 01:16 PM.
#7
Team Owner
#8
Thank you....two problems they don't list 4.75" I.D. (air cleaner O.D. side) and I do not know if the silicon can be heated safely. Spectre doesn't recommend heating it. I expect the silicon would be heat resistant but wanted to soak it in hot water to expand it 1/4" Also their reducers are only 3.5" long...I need 4.5"...What do you think? Appreciate your great assistance.
Last edited by Tahoe; 06-04-2019 at 02:49 PM.
#9
Melting Slicks
Member Since: Feb 2017
Location: Phoenix Arizona
Posts: 3,031
Received 1,119 Likes
on
764 Posts
C6 of Year Finalist (appearance mods) 2019
I've got a brand new one I never installed as I went with CAI that came with its own. 25 bucks plus shipping I'll send it to ya. Unless your in Phoenix somewhere.
#10
Ron, thank you for your offer. What company's reducer? I was hoping for black. I am in south Florida 33071. What' the economy shipping? Do you do PayPal?
Last edited by Tahoe; 06-04-2019 at 04:22 PM.
The following users liked this post:
Tahoe (06-05-2019)
#17
Melting Slicks
Hey, folks. Let me save you all the hassle of clicking on the links posted....these vendors do NOT have the correct 4.75 to 4.0 size needed for our Vettes.
This is the place I typically look... http://www.siliconeintakes.com/intake-pipe-reducer/
Check https://www.intakehoses.com/ for other options