Console aux power outlet revision
Thread Starter
Racer
Joined: Jun 2018
Posts: 322
Likes: 36
From: Allen, TX
Console aux power outlet revision
Revised the console aux power outlet to make removal of the connector much easier. The connector locking tab is on top of the outlet and it's difficult to press the locking tab while pulling the connector. This revision rotates the outlet assembly where the connector locking tab is facing down.
Pics with descriptions. I don't know why photobucket is showing the pics in reverse order.
https://beta.photobucket.com/shared/...e-9884104f0b28
Pics with descriptions. I don't know why photobucket is showing the pics in reverse order.
https://beta.photobucket.com/shared/...e-9884104f0b28
Race Director
Joined: Sep 2009
Posts: 11,351
Likes: 2,445
From: Eastern
I did this exact same thing years ago because I knew I would be removing the console a few times in my ownership.
It's a royal PIA as it sits OEM, much easier with the rotated removal slot at the bottom.
It's a royal PIA as it sits OEM, much easier with the rotated removal slot at the bottom.
Last edited by 4SUMERZ; Dec 1, 2019 at 09:03 PM.
