Aftermarket radio issue
Thread Starter
Vette Life
Joined: Mar 2020
Posts: 424
Likes: 176
From: Lanoka Harbor, New Jersey
Aftermarket radio issue
Hey guys, experiencing a weird issue today. I get in start my car and the radio will not turn on. I tried restarting, checked every fuse, no luck. It just seems dead. A few weeks ago I replaced my factory radio with a kenwood utilizing the special harness module to retain door chime, onstar etc. I purchased everything brand new from crutchfield and had no issues. Today, Door chime works, onstar works, just no radio power. Any ideas before I have to take console and dash apart to see what's going on behind there. Everything was working great before today . Thank you
Car is a 2005 Manual Convertible with 50k miles. Always on a battery tender and used about twice a week.
Car is a 2005 Manual Convertible with 50k miles. Always on a battery tender and used about twice a week.
Last edited by need4sspeed85; Aug 15, 2020 at 10:02 PM.
Thread Starter
Vette Life
Joined: Mar 2020
Posts: 424
Likes: 176
From: Lanoka Harbor, New Jersey
Thank you Pat. That will be the next thing I check. Just wanted to see if I was missing anything before I went ahead and pulled the radio out. Hope fully that's all it may be. Just wondering what may have caused the issue in the first place.
Team Owner
Joined: Dec 2012
Posts: 30,427
Likes: 1,609
From: Outside the Quick Stop N.J.
