LT4 in a C6
Thread Starter
Advanced
Joined: Aug 2007
Posts: 79
Likes: 11
LT4 in a C6
Wanting to put an LT4 in a C6Z with a blown motor. I understand there will be difficulties in getting the computer to work with the dashboard cluster. I would consider just getting an aftermarket digital dash. Is there anything else that would be problematic? Turn signals and break lights? Or is that a different module.
mechanically speaking, would the LT4 bolt up to the motor mounts and the torque tube?
mechanically speaking, would the LT4 bolt up to the motor mounts and the torque tube?
Le Mans Master
Joined: Mar 2001
Posts: 8,472
Likes: 3,970
From: Omaha
2020 Corvette of the Year Finalist (performance mods)
C4 of Year Winner (performance mods) 2019
Seems like a lot of work for a motor that's going to easily heat soak and make limited power compared to what an LS engine will do. My advice would be to get a built LS motor and then put a blower on it if you want. The LS9 can easily make 1,000+HP in stock form, and a built LS3 could do the same/more. For that matter, you could have a built engine done for less than buying an LT4 crate motor. You could do a built LS3 for less than $10K, which you could then throw a blower of your choice on to make big HP.
