radiator shroud reinstall
Thread Starter
Drifting
Joined: Oct 2009
Posts: 1,537
Likes: 165
From: Lombard, IL (Chicago suburbs)
radiator shroud reinstall
please help. Over the weekend I attempted to upgrade my oil cooler to the improved racing unit. During the process I successfully removed the radiator shroud to enlarge the holes as required for the lines. However I am unable to reinstall the shroud. I can get it all the way in but for the life of me I can't seem to get it under the metal tabs that secure it with the small screws from under the car. After struggling with it for close to 2 hours I gave up and as a result the car is currently sitting on stands in the garage disassembled.
Thread Starter
Drifting
Joined: Oct 2009
Posts: 1,537
Likes: 165
From: Lombard, IL (Chicago suburbs)
FYI - i finally figured this out... I had to slightly pull it back up, bend the bottom corner under the bracket and kind of manhandle it in. After finally getting it installed, it turns out i needed to take the bumper off anyway so I should have just done that in the first place 
